Click to enlarge
Caspar Cervical Vertebral Body Distractor
Caspar Cervical Vertebral Body Distractor
Back to products
Bone Reduction Forceps
Bone Reduction Forceps

Twist Drill

Twist Drill

drilling depth 8.0 mm, length 5-3/4″ (14.6 cm)

Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.

SKU: OZ-01-895 Categories: ,
Description
Name Twist Drill
Lead Time Lead time advised within 48 hours of order placement.
Competitor ;FF908R;S0107;S-0107;74310030;743-1003-0;575111;57-5111;732596;73-2596;FF908;R9395;R-9395;VM84-3607;VM843607;5751-11;
Specialty Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments
Material Finish Stainless Steel
Grade Premium Operating Room
Units of Measurement Each
Manufacturer Ophthalmic Zone
Sterility Non-Sterile
Usage Reusable
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Twist Drill”

Your email address will not be published. Required fields are marked *

Related products

Bone Clamp

Bone Clamp curved, extra long ratchet, 5-3/4" (14.5 cm) Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.

Bone Clamp (Reposition Forceps)

Bone Clamp (Reposition Forceps) extra long ratchet, curved, 5-1/8" (13.0 cm) Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.

Bone Graft Holder (Caspar Type)

8.0 mm x 15.0 mm tip, 21.0 cm Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip

Bone Holding Forceps

Bone Holding Forceps delicate, straight, 2x2 teeth, 5.0 mm wide, 7-7/8" (20.0 cm) Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2x2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.

Bone Reduction Forceps

Bone Reduction Forceps - 2" Ratchet 2" ratchet allows opening jaws to 4", 8" (20.0 cm) Bone Reduction Forceps are an ideal addition to any operating procedures. These forceps are crafted for use in grasping bone to aid in realignment and setting of fractures and breaks. The most unique aspect of this particular instrument is that it features a 2" ratchet which allows the jaws to open to 4" making it able to fit a vast array of surgical scenarios where other instrumentation would not suffice.

Depth Gauge

Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.

Reiner Rongeur

Reiner Rongeur 7" (17.8 cm) Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.

Vertebral Body Dissector (Caspar Type)

Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.