| Name | Reiner Rongeur |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Bone Rongeurs |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Reiner Rongeur
Reiner Rongeur
7″ (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Description
Reviews (0)
Related products
Adson Cranial Rongeur
Adson Cranial Rongeur is ideally suited for use in neurosurgical procedures. This instrument features a 8.0 mm wide jaw that makes it suitable for grasping bony tissue or other dense tissue areas such as cartilidge. This rongeur is particularly well suited for procedures such as craniotomies that require increased access to brain tissue through the cranial bone or other cranial procedures. Additionally this ronger is available in three different profiles: straight, curved or rat tooth making it suitable for use in a variety of surgical scenarios and surgeon preferences.
Bacon Cranial Rongeur
Cranial Rongeur is a unique instrument crafted for use in neurosurgical procedures that require access to the brain tissue or other areas associated with it. This instrument can be used to chip away or create a window in the skull to create increased access so the surgical field. These rongeurs feature a 2.0 mm jaw width and are set at a slight angle that allows the handles to remain comfortable out of the surgical field and able to manipulate easily.
Bishop Bone Holding Forceps
Bishop Bone Holding Forceps
adjustable jaw
Bishop Bone Holding Forceps are ideally suited for use in orthopedic surgical procedures. This instrument is uniquely designed for procedures such as fracture repair or bone reduction that require a firm grasps on a bone in a particular orientation. It aids in alignment of bone segments through a procedures without slipping or movement to ensure accuracy. Additionally these forceps feature and adjustable jaw that gives it increased versatility making it suitable to almost any surgical scenario.
Blumenthal Rongeur
Blumenthal Rongeur is a versatile instrument that is useful in a variety of surgical scenarios. This instrument is designed with jaws that can be used to grasp at bone or other hard tissue surfaces and chip or cut away at it. Under the manual control of surgeon it can be used to gnaw away at surfaces such as cartilage for remodeling during surgery. This particular instrument is available with beaks at 30, 45 or 90 degree angles making it uniquely able to grasp tissue in areas that are difficult to reach with other instruments.
Bone Clamp (Reposition Forceps)
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Twist Drill
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Vertebral Body Dissector (Caspar Type)
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Reviews
There are no reviews yet.