| Name | U.S. Army Pattern Gouges |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;282206;28-2206;2822-06;282212;28-2212;2822-12;2822-18;2822-06_2822-18; |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone. |
| Sterility | Non-Sterile |
| Usage | Reusable |
U.S. Army Pattern Chisel
straight, 6-1/4″ (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Description
Reviews (0)
Related products
Alexander Gouge
7" (18.0 cm)Â Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
Cherry Osteotome
octagonal handle, 8" (20.0 cm)Â Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
Hibbs Chisel
9-1/2" (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Lambotte Osteotome – W/ Calibration Lines
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Lexer Gouge
w/ sterilizable (up to 143 degrees c) plastic handle Lexer Chisel is crafted for use in surgical procedures that require chipping away or splitting bone or more general scraping maneuvers. This gouge features a large plastic handle that is easy to grip. Additionally this handle is sterilizable up to 143 degrees c making it well suited for use in multiple surgical procedures without the concern of contamination or infection. This instrument features a long slim neck that flares out into a flat wide blade perfect for scraping action along bone and also in actual cutting of bone. It is available in a wide variety of widths and two different lengths: 18 cm and 22 cm to accommodate a variety of surgical scenarios and surgeon preferences.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Reviews
There are no reviews yet.