| Name | Wire Pulling Forceps |
| Lead Time | 0-3 days |
| Competitor | ;OS3085;275140;275-140;145636;14-5636;1456-36; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Pulling Forceps
max capacity 1.0 mm, 6-1/2″ (16.5 cm)Â Wire Pulling Forceps are a specialized instrument ideally suited for using in manipulation of wire. Many neurosurgical and orthopedic procedures require placement of grafts or other things that necessitate some stabilization to prevent injury. Laminectomies and other spinal surgeries especially require the insertion of wire throughout to prevent incomplete healing or trauma and thus these forceps can be used to handle the wire and guide it through different areas. This instrument has a maximum capacity of 1.0 mm.
Description
Reviews (0)
Related products
Delicate Wire Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)Â Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Diamond Pin Wire Cutter
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)Â Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Locking Pliers
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
Reviews
There are no reviews yet.