Hercules-Type Wire Cutter – 3.0 mm Wire Max

5-1/2" (14.0 cm) Blunt Jaw Pliers can be used in a variety of surgical procedures that require the insertion and manipulation of wires. This instrument features slightly rounded handles which makes it easy to hold and operate manually and is a traditionally utility poliers with adjustable jaws. The blunt jaws prevent breakage and splintering of the wire and allows for increased pressure to reshape it to the appropriate shape. Wires can be used to approximate fractures or can be inserted through skin and bone to provide traction on the bone.

serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.

replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.

tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.