| Name | Hibbs Chisel |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hibbs Chisel
9-1/2″ (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Description
Reviews (0)
Related products
Alexander Gouge
7" (18.0 cm)Â Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
Dawson-Yuhl Gouge
7.0 mm, 11" (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Hibbs Osteotome
9-1/2" (24.0 cm)Â Hibbs Osteotome is made for use in neurosurgical procedures that require scraping or chiseling through bone. This osteotome features a thick handle for ease in gripping and maneuverability. The handle narrows into a slim neck which widens out again into a chisel type blade. Additionally the blade features a slight curvature increasing its ability to be used to strip or scrape away layers of bone and tissue. This instrument is available in ten sizes ranging from 6.0 mm to 38.0 mm and in either a curved or straight profile allowing it to be useful in a variety of patient scenarios and surgeon preferences.
Lambotte Osteotome – W/ Calibration Lines
w/ calibration lines, 7-1/4" (18.4 cm)Lambotte Osteotome is designed for use in neurosurgical procedures that require manipulation of bone. This instrument is designed to be used manually to cut through bone. It offers many advantages over drills or mechanical tools such as increased sensitivity to adjust the level of force. Additionally this osteotome has the added benefit of featuring calibration lines. This osteotome is available in twelve widths in a straight profile as well as two widths in a curve profile. A full set of ten featuring straight and curved profiles is also available.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Shoulder Penetration Gouge
3.0 mm, 8-1/2" (22.0 cm)Â Shoulder Penetration Gouge is a specialized instrument crafted for use in surgical procedures of the shoulder. This tool is made to penetration the shoulder for increased access. Additionally it measures 8.5" long and 3.0 mm and is crafted from premium German operating grade stainless steel making it a durable and long lasting instrument.
Smith-Petersen Osteotome
8" (20.0 cm)Â Smith Peterson Osteotome is an ideal instrument for use in neurosurgical and other procedures that require manipulation of bone. This osteotome features a smooth barrel shaped handle that is easy to grip. Additionally it features a wide, flat handle end that can be struck with a hammer or mallet to drive the chisel shaped end with increased force. This instrument can be used to cut, scrape or shave bone to increase access to the surgical field or simply for reshaping. This osteotome is available seven sizes ranging from 6.0 mm to 32.0 mm and in either a straight or curved profile making it useful in a wide range of surgical procedures including craniotomies.
Reviews
There are no reviews yet.