| Name | Dawson-Yuhl Gouge |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Dawson-Yuhl Gouge
7.0 mm, 11″ (28.0 cm)Â Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Description
Reviews (0)
Related products
Cherry Osteotome
octagonal handle, 8" (20.0 cm)Â Cherry Osteotome is designed for use in cutting and preparation of bone in neurosurgical procedures. This osteotome has a long, slender profile as well as a uniquely designed octagonal handle which allows it to be gripped and maneuvered easily. Additionally this osteotome is available in five widths 3.0, 4.0, 5.0, 6.0 and 7.0 mm and in either a straight or curved profile making it suitable for a wide variety of patient needs and surgical approaches.
Hibbs Chisel
9-1/2" (24.0 cm)Â Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Hibbs Osteotome
9-1/2" (24.0 cm)Â Hibbs Osteotome is made for use in neurosurgical procedures that require scraping or chiseling through bone. This osteotome features a thick handle for ease in gripping and maneuverability. The handle narrows into a slim neck which widens out again into a chisel type blade. Additionally the blade features a slight curvature increasing its ability to be used to strip or scrape away layers of bone and tissue. This instrument is available in ten sizes ranging from 6.0 mm to 38.0 mm and in either a curved or straight profile allowing it to be useful in a variety of patient scenarios and surgeon preferences.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm)Â Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Smith-Petersen Gouge
8" (20.0 cm)Â Smith Peterson Gouge is crafted for use in surgical procedures that require manipulation of bone such as scooping or creating a hole. This instrument can be used to increase access to the central soft tissue portion of the bone or in prepping bones from grafting. Uniquely this gouge features a rounded handle that increases gripping and allowing for firm handling and maneuverability. Additionally this instrument is available in either a straight or curved pattern and in seven sizes ranging in width from 6.0 mm to 30.00.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
U.S. Army Pattern Chisel
straight, 6-1/4" (16.0 cm)Â US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Reviews
There are no reviews yet.