| Name | McCulloch Multi-Hooked Blade – Titanium |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;5757-44T;MF387T;575745T;57-5745T;5757-45T;MF388T;575746T;57-5746T;5757-46T;MF389T;575747T;57-5747T;5757-47T;MF390T;575748T;57-5748T;5757-48T;MF391T;575749T;57-5749T;5757-49T;5757-44T_5757-49T; |
| Specialty | Neuro, Ortho & Spine-Retractors – Mcculloch Retractor System |
| Material Finish | Titanium |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
McCulloch Multi-Hooked Blade – Titanium
titanium McCulloch Multi-Hooke Blade is an accessory component that can be used along with the McCulloch retractor frame. The multi-hooked design gives multiple lengths at which small spokes project from the main blade giving retraction ability throughout the length of the blade. This type of instrument is particularly well suited for use in orthopedic spinal procedures that require increased visualization and access to particular segments of the spine . Additionally it is made from titanium which makes it stronger and more durable than stainless steel as well as lightweight and resistance to corrosion, staining and pitting. and is available in six blade lengths ranging from 2.0 to 7.0 and is sold in eaches.
Description
Reviews (0)
Related products
Beckmann-Eaton Laminectomy Retractor
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm)Â Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Blade Ejector Forceps
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Blount Knee Retractor
6.0 mm distal tip, 7" (17.5 cm)Â Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Campbell Nerve Retractor
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Cervical Retractor Longitudinal Blade
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Cervical Retractor Medial Blade
stainless steel, ball snap closure, w/ teeth Cervical Retractor Medial Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Cervical Tissue Retractor
1 blunt prong, 13.0 mm depth, 5-1/8" (13.0 cm)Â Cervical Tissue Retractor is ideally crafted for soft tissue retraction in the cervical spinal area. This retractor also features one blunt prong that allows for exploration and movement without damage or trauma to surrounding tissue. This can be used in orthopedic neurosurgical procedures such as anterior laminectomies.
Charnley Initial Incision Retractor
standard pattern Charnley Initial Incision Retractor is a unique instrument specifically designed for use in retraction at the beginning of surgical intervention when the first incision is made. An ideal tool for a vase array of neurosurgical procedures because it securely open up the surgical field to give unobstructed access. This retractor set includes a frame, a long blade, short blade as well as a weight on a chain.
Reviews
There are no reviews yet.