| Name | Bishop Bone Holding Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Bone Holding Forceps |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bishop Bone Holding Forceps
Bishop Bone Holding Forceps
adjustable jaw
Bishop Bone Holding Forceps are ideally suited for use in orthopedic surgical procedures. This instrument is uniquely designed for procedures such as fracture repair or bone reduction that require a firm grasps on a bone in a particular orientation. It aids in alignment of bone segments through a procedures without slipping or movement to ensure accuracy. Additionally these forceps feature and adjustable jaw that gives it increased versatility making it suitable to almost any surgical scenario.
Description
Reviews (0)
Related products
Bone Clamp
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Bone Graft Harvesting Forceps (Graft Cutter)
Bone Graft Harvesting Forceps (Graft Cutter)
adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Bone Graft Impactor (Caspar Type)
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Bone Reduction Forceps
Bone Reduction Forceps - 2" Ratchet
2" ratchet allows opening jaws to 4", 8" (20.0 cm)
Bone Reduction Forceps are an ideal addition to any operating procedures. These forceps are crafted for use in grasping bone to aid in realignment and setting of fractures and breaks. The most unique aspect of this particular instrument is that it features a 2" ratchet which allows the jaws to open to 4" making it able to fit a vast array of surgical scenarios where other instrumentation would not suffice.
Bone Reduction Forceps
Bone Reduction Forceps - Pointed Tips W/ Serrations, Curved
pointed tips w/ serrations, curved
Bone Reduction Forceps are ideal for surgeries to restore fractures in bone or to realign dislocations. This forceps has pointed tips and serrations that increase its ability to explore deeply in tissue as well as to maintain grasp of the bone during manipulation. It also features a curvature that allows it to be better fit to the contour of the bone. Additionally this instrument is available in 5" or 5.5" to suit the specific surgical scenario or surgeon preferences.
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Rowland-Ruskin Forceps
Rowland-Ruskin Forceps
double-action, narrow jaws, 7-1/8" (18.0 cm)Â Rowland-Ruskin Forceps are a unique designed instrument ideally suited for use in a number of different procedures that require clipping of small bones. These forceps features a spring handle as well as double-action, narrow jaws. These are well suited for areas such as the orbit of the eye as well as bones in the nasal area. These forceps are available in two different profiles straight or curved making it well suited for access in a number of surgical scenarios.
Vertebral Body Dissector (Caspar Type)
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Reviews
There are no reviews yet.