| Name | Bone Graft Impactor (Caspar Type) |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel/Plastic |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bone Graft Impactor (Caspar Type)
Bone Graft Impactor (Caspar Type)
graduated 1/4″ to 1-1/4″, shaft 6-1/4″ (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼” to 1 ¼” and features a shaft of 6 ¼”. This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Description
Reviews (0)
Related products
Bone Awl
Bone Awl
5-1/2" (14.0 cm)
Bone Awl can have a wide array of applications in orthopedic and neurosurgical procedures. Generally speaking it is used to create or enlarge holes in bone. Specifically it is ideally used to create pilot holes in vertebrae during spinal surgeries. It can be used in bone grafting procedures where the bone needs to be prodded to assess its condition. This awl features a large teardrop shaped handle that makes it easy to handle manually and maintain a firm grip to increase accuracy.
Bone Clamp
Bone Clamp
curved, extra long ratchet, 5-3/4" (14.5 cm)
Bone Clamp is a versatile surgical instrument that can be used in a vast array of surgeries. It can be used in seismoidectomy procedures to grasp the small sesamoid bone or it can be used in simple grasping of long bones to aid in alignment. It features curve blades that allow it to dip into the surgical field while allowing the handle of the instrument to remain out of the surgical field. Additionally this clamp features an extra long ratchet that further increases its versatile and widths it can be set at.
Bone Graft Harvesting Forceps (Graft Cutter)
Bone Graft Harvesting Forceps (Graft Cutter)
adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Bone Graft Holder (Caspar Type)
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Caspar Cervical Vertebral Body Distractor
Caspar Cervical Vertebral Body Distractor Caspar Cervical Vertebral Body Distractor is a specialized instrument crafted for use in neurosurgical procedures, specifically those of the spine. A distractor aids in creating separation of joint surfaces without causing rupture of binding ligaments without causing any displacement. This can be used in herniated disc procedures to repair pinched nerves or other procedures of the spine. This instrument is available in either a left or right design.
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Reiner Rongeur
Reiner Rongeur
7" (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Twist Drill
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Reviews
There are no reviews yet.